5 Gallon Kit of PPG Dimetcote 9 (DI9-A and DI9-P) Zinc Primer-FULL KITS

Description

These kits contain a large unit of DI9-A/05 liquid and 5 single small units of DI9-P/01 zinc. You will mix all 5 of the DI9-P/01 into the DI9-A/05 to achieve a mixed volume of 5 gallons. These kits will be shipped via freight carrier, so you will need to have a forklift or a freight dock in order to purchase these kits. Freight costs will be calculated based on delivery location and quantities ordered. Contact seller for freight quotes.
Description
Two-component, moisture-curing zinc (ethyl) silicate coating
Characteristics
Anticorrosive primer for structural steel
Complies with the compositional requirements of SSPC-Paint 20, Level 1
Specified for structural joints according to ASTM A325 or A490 Bolts RCSC specification, Class B
Suitable as a system primer in various paint systems based on unsaponifiable binders
Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
When suitably topcoated provides excellent corrosion protection for steel substrates up to 540°C (1000°F)
Can withstand service temperatures up to 650°C (1200°F) when topcoated with PPG HI-TEMP 1027™
Must not be exposed to alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
*This product is not returnable. Excess quantities will not be accepted for return.*
Product Data Sheets and Safety Data Sheets will be shipped with purchase.