-40%
DIG Drip Irrigation Tubing 1/2 in. (.700 O.D.) x 500 ft. Crack Proof Poly Black
DIG Drip Irrigation Tubing 1/2 in. (.700 O.D.) x 500 ft. Crack Proof Poly Black
DIG Drip Irrigation Tubing 1/2 in. (.700 O.D.) x 500 ft. Crack Proof Poly Black

DIG Drip Irrigation Tubing 1/2 in. (.700 O.D.) x 500 ft. Crack Proof Poly Black

$ 29.68

Availability: 100 in stock
  • Tubing Length (ft.): 500
  • Return shipping will be paid by: Buyer
  • Outer Diameter (in.): .50
  • Type: Drip Tubing/Drip Irrigation Line
  • Pressure Rating: 60 psi
  • Material: Polyethylene
  • Maximum Working Pressure: 60 psi
  • Drip Line/Tubing Type: Drip or Emitter Line Tubing
  • Inner Diameter (in.): .50
  • Installation Area: Garden (above ground)
  • Color Family: Blacks
  • Suitable For: Plant Pots/Flower Pots
  • Refund will be given as: Money Back
  • Condition: New
  • Assembled Depth (in.): 22 in
  • Assembled Height (in.): 12 in
  • MPN: B37
  • Assembled Width (in.): 22 in
  • Brand: DIG
  • Irrigation System Component: Tubing
  • All returns accepted: Returns Accepted
  • Color: Black
  • Item must be returned within: 30 Days

    Description

    DIG Drip Irrigation Tubing 1/2 in. (.700 O.D.) x 500 ft. Crack Proof Poly Black
    Made with premium quality polyethylene resins, DIG’s 0.700 OD drip irrigation poly tubing is designed to meet the demands of any drip irrigation project, above or below ground, from residential gardening to commercial landscape and agricultural installations. The drip tubing, commonly referred to as poly tubing, blank tubing or drip hose, is used as the primary supply line of a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected to deliver water to the plant area. DIG’s drip irrigation poly tubing coil has outstanding environmental stress-cracking resistance, high burst strength and UV protection for durability and long life.
    Used as the primary supply line in a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected
    Designed to meet the demand of any drip irrigation projects from professional landscape to residential gardening installations, for above or below the ground
    Resistant to cracking, heat, UV rays and chemicals
    Produced using dow’s 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
    Use with DIG’s 0.700 compression fittings, color black, and Nut Lock fittings
    Dimensions: 500 ft. with .600 ID x .700 OD
    Bending radius: 1 ft.
    Maximum operating pressure: 60 psi
    Can be installed above or below ground
    DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
    Maximum recommended flow rate per each length of drip tubing is not to exceed 220 GPH (3.6 GPM)
    DIG Drip Irrigation Tubing 1/2 in. (.700 O.D.) x 500 ft. Crack Proof Poly Black
    Assembled Depth (in.): 22 in
    Assembled Height (in.): 12 in
    Assembled Width (in.): 22 in
    Inner Diameter (in.): .50
    Outer Diameter (in.): .50
    Tubing Length (ft.): 500
    Color Family: Blacks
    Drip Line/Tubing Type: Drip or Emitter Line Tubing
    Irrigation System Component: Tubing
    Pressure Rating: 60 psi
    DIG Drip Irrigation Tubing 1/2 in. (.700 O.D.) x 500 ft. Crack Proof Poly Black