Drip Irrigation 1" MPT Spin-Clean Filter with Stainless Steel Filter Element

Description

1” Spin-Clean ‘Y’ Filter
with
150 Mesh Stainless Steel Filter Element
and Flush Valve
Offered by:
D
rip
R
ite
I
rrigation
P
roducts
®
Part Number:
AP-4E-1BN-150
Specifications:
1” MPT inlet/outlet with a 150 mesh
stainless steel
filter element
,
with spin-clean action and ball valve for easy draining and screen cleaning!
This is
NOT
your cheap light weight filter with nylon filter element. Sure, you can purchase a filter that is less expensive,
but you cannot buy one that offers better quality for your money! This filter is designed and built to last! A quality filter is by far the most important part of any good drip irrigation system! 80 PSI maximum working pressure.
Don't take a chance on having to replace all the emitters, micro-sprays, drip tape or porous pipe
simply because you scrimped on the filter you bought for your drip irrigation system. Please note, this filter is not designed to be installed  under full line constant pressure! It should be installed after, or downstream, from a control valve.
You are purchasing a 1" 'Y' filter with 150 Mesh Stainless Steel Element & Flush Valve!
NOTICE!
When purchasing more than one item we will combine shipping charges whenever possible.
After
placing your order, but
before
paying for your order, please
request
an invoice.
Please take a look at all the products we offer in our eBay Store!
Feedback Policy
We give feedback on all
completed
transactions. We consider a transaction complete after the following: You have paid, we have shipped, you have received the item to your complete satisfaction, and have left us feedback. Once you leave us feedback, our feedback is usually left within 48 hours. Thank you!
Terms & Conditions of Sale
There is a 25% restocking charge on all returned merchandise. Products may not be returned for ANY reason without prior authorization. A RGA number is essential and may be obtained from the order desk. Claims for defective material MUST be made within thirty (30) days from receipt of goods. Claims for damaged goods should be made directly to the freight carrier, not the factory. Hold onto damaged goods, in the original containers, until they have been inspected.