Mister Landscaper 4-Pack Drip-Spray Drip Irrigation Drippers Model #MLD-.5PC

Description

These 0.5 GPH pressure compensated drippers are used to keep a constant flow of 0.5 GPH at various water pressures up to 25 PSI
A 25 PSI pressure regulator MLA-25PR and a filter MLFF-41 are highly recommended to be used first at the water source when using these 0.5 GPH drippers
Use this dripper to slowly water a potted plant or landscapes using only 0.5 GPH of water and they are ergonomically designed with a wide-winged top to make the installation easier
The water supply enters into the dripper from the red barbed end and then the water is dispersed from the black stem end
Install these drippers directly into the 1/2-in poly tubing by first snapping a hole using either of our punch tools MLA-51 or MLA-TOOL and use our goof plug if you snap a hole in the wrong place or want to relocate the dripper
These drippers can also be installed by running a piece of 1/4-in vinyl tubing to the plant from the 1/2-in poly tubing using the enclosed 1/4-in barbed couplers then by pushing in the dripper at the other end of the 1/4-in vinyl next to the plant
Our 1/4-in support stakes MLT-DST can be used to securely hold the 1/4-in vinyl and 0.5 GPH dripper near the plant
Also use our 1/4-in tees and elbows MLT-ATE to run the 1/4-in vinyl in opposing directions or in tight corners to supply water to these drippers
With a beginning water pressure of 25 PSI you can install up to 500 of these 0.5 GPH PC drippers off our 1/2-in poly tubing