NoiseKen EMI Noise Meter FVC-1000 with 2 Probes and 20dB Attenuator

Description

NoiseKen EMI Noise Meter FVC-1000 with 2 Probes and 20dB Attenuator
Product Description
This is the NoiseKen EMI Noise Meter.
It comes complete with 2 probes and a 20dB Attenuator:
Electric Near Field F-10-001.
Magnetic Near Field F-10-002.
20dB Attenuator F-10-003.
SPECIFICATIONS:
Frequency Range: 30 MHz to 1000 MHz in four LED Display Bands.
Adjustable Volume Level.
Noise Ken FVC-1000 EMI  Sensor in Original Case.
Manufacturer: Noise Laboratory Co., LTD / Noise Ken Model No: FVC-1000 Electro-Magnetic Interference Measuring Instrument Frequency range:
Simultaneous 4 spectra measurement
30MHz to 88MHz.
88MHz to 216 MHz.
216MHz to 470 MHz.
470 MHz to 1000MHz.
Input snesitivity:
Main unit input sensitivity: 0.224 - 7.07mV (-60 to -30dBm) 50 ohm system, 0.2236V = 0dB Electric field probe: 10-316mV Magnetic field probe: 0.06 - 2.0mA Level Display: For each frequency band: 20-point LED bargraph (1.5dB / point) Pulse response: 1uS min Dynamic range: 30dB
FVC-1000 main unit including :
Electric field probe F-10-001,
Magnetic field probe F-10-002 ,
Attenuator (20dB) F-10-003
Instruction manual and examples of protective measures to reduce radiated noise using the FVC-1000
Original Carrying case
Main unit input sensitivity:
0.224 - 7.07mV (-60 to -30dBm) 50 ohm system, 0.2236V = 0dB
Electric field probe:
10-316mV
Magnetic field probe:
0.06 - 2.0mA
Pulse response:
1uS min
Dynamic range:
30dB
Frequency range: Simultaneous 4 spectra measurement
30MHz to 88MHz
88MHz to 216 MHz
216MHz to 470 MHz
470 MHz to 1000MHz
It is in Voltage setting to AC230V, and it may be Changed the Voltage setting to AC115V . But it should be done by a Technicain becaust it needs to open the unit to do the setting!