-40%

Official concrete acid stain red, orange, terra cotta color 1 gallon Red Rock

$ 31.66

Availability: 103 in stock
  • Condition: New
  • Type: Concrete Acid Stain
  • Coverage: 100 to 200 sq ft
  • Outdoor Coverage: ranging from 100 - 200 square feet per gallon
  • Model: Active Elements
  • Country/Region of Manufacture: United States
  • Manufacturer Color: Red Rock
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer
  • Packaging: plastic jug
  • Room: pool decks
  • Features: For Commercial Use
  • Time Before Recoating: 4 plus hours
  • Color: red, orange, terra cotta
  • Container Size: 1 gallon
  • Brand: Active Elements
  • All returns accepted: Returns Accepted
  • Application Method: Spray
  • Drying Time: 4 plus hours
  • Refund will be given as: Money Back
  • Minimum Temperature For Use: 50
  • Product: Concrete Acid Stain
  • Suitable For: Cement
  • MPN: 6039-1G
  • Indoor Coverage: 200-300 square feet per gallon

    Description

    UBQ Industries - Active Elements™ Concrete Acid Stain
    Gorgeous earth tones for indoor and outdoor concrete
    WARNING! THIS IS NOT A CONCRETE PAINT.  THIS IS ACID STAIN AND IT WORKS DIFFERENTLY THAN PAINT!
    Active Elements
    ™ acid stain penetrates the concrete surface and chemically reacts with the concrete to form a translucent, variegated and sometimes-marbleized effect.  The art of concrete acid stain is in the variegated look.
    When changing the color of a concrete project, sealing with one of our appropriate sealers can change the outcome of the projects look (usually increasing the depth of color and protecting the surface from wear).
    For small projects or even just testing for color affects, try our Concrete Acid Stain Sample Kit.  Our kit includes 10 – 16oz bottles of each one of our concrete stain colors.
    Uses:
    Concrete                       Patio                                         Commercial                             Ornamentals
    Concrete Block            Driveway                                  Residential                               Landscape Block
    Brick                             Walkway                                  Retail                                        Rocks
    Curbing                        Pool Deck                                Industrial                                 Boulders
    Retaining block           Garage Floor                            Parking Garages                      Statuary
    Retaining Walls
    V
    ertical Concrete
    Faux Finishes
    Notes:
    • The texture of concrete, age and dilution ratio affect final color appearance.
    • The translucence of concrete acid stain also allows the many unique characteristics of the slab to show through. Every project is a unique piece of art.
    • Sealers and concrete condition will dramatically affect the final outcome of concrete acid stains. Conduct a test on your slab prior to application.
    • The samples displayed are a representation only and do not guarantee the final color to be an exact match.
    Coverage variations:
    • Heavily broom finished/rough concrete = 100 square feet per gallon
    • Light Broom finished concrete = 150-200 square feet per gallon
    • Smooth troweled concrete (usually interior floors) = 200-300 square feet per gallon
    (**Specific application method used can affect amount of square foot coverage **)
    Key Features for Staining Concrete:
    • Unique and variegated concrete floor finishes
    • Indoor and outdoor use of acid stain
    • When needing a lighter color use Active Elements Dilute as a reducing agent.
    • Use a plastic pump sprayer, brush, rag or sponge to apply concrete acid stain to your surface area.
    *** Pacific Dogwood and Sanibel colors are for interior use only***
    Points of Interest regarding concrete stain:
    • The texture of concrete, age and dilution ratio will affect final color appearance.
    • The translucence of concrete acid stain also allows the many unique characteristics of the slab to show through. Every project is a unique piece of art.
    • Sealers and concrete condition will dramatically affect the final outcome of concrete acid stains. Conduct a test on your slab prior to application.
    • The samples displayed are a representation only and do not guarantee the final color to be an exact match.
    Combing Shipping Options:
    If you would like to order more than one stain or a combination of colors, please contact us and we can set up a new invoice with one shipping price.
    About UBQ Industries, inc
    Our team has been developing and researching decorative concrete products, concrete stains, overlays, microtoppings and coatings since 1996.   Everyone is always looking for great products at better pricing and our wholesale and bulk pricing gives you that.  Check out our variety of products from concrete stain and sealers to concrete resurfacing products.
    We also do bulk, wholesale and pallet pricing.
    We can also private label your own decorative concrete supply line?
    **This product may only be used on fully cured concrete. Allow a minimum of 28-45 days of cure time after the concrete placement to allow ample time for the concrete to completely hydrate. **
    Surface Preparation
    Concrete must be clean and free of all dirt and contaminants. Concrete floors must be open and porous prior to applying Active Elements - Concrete Acid Stain. Oil and grease must be removed prior to stain application using Active Elements - Degrease. Paints and sealers must be removed prior to stain application using Active Elements – Paint Strip.
    • Interior floors - Required minimum preparation is scrubbing using a floor machine (buffer) with a black pad, grit brush or sanding screen.
    • Exterior surfaces (broom finished) - Required minimum preparation is pressure washing.
    Safety
    Always use appropriate safety equipment including but not limited to, goggles, face shield, rubber gloves, chemical resistant clothing or apron, and chemical respirator.
    Dilution
    When a lighter color is desired, use Active Elements – Dilute as a reducing agent.
    Mix at a ratio of 1 Part Active Elements - Concrete Acid Stain to 1 Part Active Elements – Dilute
    Application
    Equipment must be constructed of plastic or other non-corrosive material. The stain can be applied using a plastic pump sprayer, brush, rag, or sponge. Wash equipment thoroughly after use with water.
    Drying / Reaction Time
    Allow a minimum of 4 hours drying/reaction time.
    Neutralization
    After the full stain reaction has occurred neutralize the concrete by scrubbing the surface with Active Elements - Neutralize (8oz in 5 gallons water). A stiff bristle brush or broom should be used to scrub in the neutralizing solution. Use a wet vacuum to collect residue and waste water. Dispose in accordance with local, state, and federal regulations.
    Residue Removal
    • Interior floors
    - Required minimum residue removal method is scrubbing using a floor machine (buffer) with a nylon bristle brush or white pad. Use a wet vacuum to collect residue and waste water. Dispose in accordance with local, state, and federal regulations.
    • Exterior surfaces
    - Required minimum residue removal method is pressure washing. Use a wet vacuum to collect residue and waste water. Dispose in accordance with local, state, and federal regulations.
    Caution - Residue runoff can stain and discolor unprotected concrete, buildings and landscape features. It may also cross contaminate previously applied colors.
    Sealer Options - Exterior Surfaces
    A. Active Elements
    – TrueSeal 400S is a solvent borne exterior sealer that contains UV absorbers for long lasting color protection. It will give a tough glossy surface and a deep rich color.
    B. Active Elements
    –Water Repel 101 is a moisture repelling sealer for interior and exterior surfaces. It is a reactive siloxane/silane no-build treatment that when cured gives a no-gloss finish and has zero thickness build.
    Sealer Options - Interior Floors
    A. Active Elements
    – London Wax is a blend of natural renewable resource waxes blended with a food grade mineral oil. It gives a beautiful low luster rich color that is easy to maintain.
    B. Active Elements
    – Advance Seal is a water based acrylic technology floor sealer. Perfect when a deeper richer color is desired along with a hard shell protective sealer. It gives a beautiful medium sheen appearance.
    C. Active Elements
    –Advance Finish is a water based acrylic floor finish that can be used on top of Advance Seal as a sacrificial top coat for high traffic floors. It is an easy to apply glossy top coat that has a 1 hour return to service, making it ideal for retail, office and commercial environments.
    D. Active Elements
    –Water Repel 101 is a moisture repelling sealer for interior and exterior surfaces. It is a reactive siloxane/silane no-build treatment that when cured gives a no-gloss finish and has zero thickness build.
    Special Considerations
    • Color Change
    The use of Pacific Dogwood and Sanibel on concrete which has no vapor barrier underneath (typically exterior concrete slabs) have the risk of partially or completely turning black when excessive amounts of moisture migrate from underneath the slab to the top surface.
    • Color Variances
    Results may vary from color chart due to differing compositions of concrete. The texture of the concrete, age and dilution ratio affect final color appearance. Many slab characteristics show through the stain.
    Warranty
    This warranty is made in lieu of all other warranties, either expressed or implied. Before application the User shall determine the suitability of the product for his/her intended use and User assumes all risks and liabilities whatsoever in connection therewith. Neither seller nor manufacturer has any knowledge or control concerning the purchaser’s use of this product and no warranty is made as to the results of any use. The Manufacturer and/or Seller warrants that if any goods supplied prove defective in material the sole obligation shall be to replace said product. Any claim of defective product must be received in writing within one (1) year from date of shipment. Neither Manufacturer nor Seller shall assume any liability for injury, loss, or damage resulting from use of this product.
    CAUTION
    WARNING! CORROSIVE:
    Causes skin and eye burns. Harmful if swallowed or inhaled. Causes severe eye irritation with possible blindness. Vapor and mist causes irritation to nose, throat, and lungs. Always use proper safety equipment. Consult MSDS for additional chemical and safety information.
    FIRST AID
    Skin
    - Wash thoroughly with soap and water. Discard affected clothing and footwear.
    Eyes
    - Flush with water immediately. Hold eyelids apart while flushing material out thoroughly with large amounts of water. Seek Medical Attention Immediately!
    Ingestion
    - Give several glasses of water or milk. Seek Medical Attention Immediately!
    Inhalation
    - Move to fresh air.
    DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN.