Tru-Glaze 4030 Primer Coat - Waterborne Epoxy Primer

Description

DEVOE COATINGS - Tru-Glaze 4030 Primer Coat (250+ square foot/gallon)
Devoe Coatings Tru-Glaze 4030 Waterborne Epoxy Primer
Add this primer coat to your Original Color Chips Floor Coating kit for added longevity and build. This Waterborne Epoxy Polyamide light gray primer coat has a flat finish for superior adhesion to
concrete, masonry, glazed brick, wood
or
ceramic tile as well as
subsequent coatings
.
A high performance, two-package, chemically-cured, waterborne epoxy rust inhibitive primer for interior or exterior steel, aluminum and certain galvanized metal surfaces. Used over
concrete, masonry, glazed brick, wood
or
ceramic tile
.
Features excellent adhesion, corrosion resistance, and good resistance to splash, spillage or fumes of a wide range of chemicals. May be topcoated with epoxy, urethane, alkyd, or latex coatings. Light gray color permits good coverage with first finish coat.
Color:
Light Gray
Finish:
Flat
Clean-up Solvent:
Soap and water
Weight/Gallon (mixed):
11.4 lbs./gal. (1.37 kg/L)
VOC (mixed):
1.61 lbs./gal. (193 g/L)
Solids By Volume (mixed):
47% ± 1%
Practical Coverage:
Apply at 270-300 sq. ft./gal. (6.0-10.0
m2/L)
Recommended Film Thickness:
2.0-4.0 mils (50-100
microns) dry - 4.0-8.0 mils (100-200 microns) wet
Dry Time @ 77°F (25°C) & 50% RH:
To touch - 2 hours
To recoat
- Overnight up to one week
Full cure
- 5 days
Substrate Temperature 77°F (25°C)
Minimum Recoat
16 Hours
Dry Hard
24 Hours
Advantages:
• Excellent adhesion
• Excellent corrosion resistance
• Lead free pigmentation
• Light gray color permits good finish coat hiding
• Excellent recoatability with all types of finishes
• Low odor and a high flash point
• Low VOC
• Performance alternate for Federal Specification
MIL-P-23377F (TYPE 1, CLASS 3)
Any further questions, comments, or concerns, please feel free to message us. Thank you
- NORKAN INC